Endecotts Ltd - analytical sieves, wire mesh filters

Home Page

Sieves

Filters

Shakers

Sampling

Products

Sales

Quality

Company

Contact

Email:

sales@endecotts.com

Telephone:

+44 (0)20 8542 8121

Fax:

+44 (0)20 8543 6629


	Test sieves for all types of applications	< Back

	Half Height Sieves Where smaller quantities of sample are being analysed half height sieves are often used. These are available in diameters of 100, 150, 200, 250, 300, 315, 350, 400 and 450 mm, as well as 8, 12 and 18 inches with the complete range of woven wire mesh or perforated plate sieving media.

	Microplate Sieves For very fine particle size analysis Endecotts produce a range of microplate sieves made from electro-formed nickel plate in stainless steel frames of 100 mm diameter. Available with unique self clearing apertures in sizes from 5 µm upwards.

	Wet Washing Sieves For samples that need to be separated with the help of wet washing. Available in 8 inches diameter by 4 or 8 inches deep and 200 mm by 100 mm or 200 mm with brass or stainless steel frames. A complete range of aperture sizes with optional support medium for fine mesh.

	Extra Depth Sieves Extensively used by the construction and cement industries. These extra depth sieves are available with a diameter size of 450 mm and a depth of 300 mm. Made from stainless steel with woven wire mesh or perforated sieving media.

	Air Jet Sieves These sieves are specifically designed for use with air jet systems. They are available in 200 mm diameter brass or stainless steel frames and an extensive range of aperture sizes.

	Grain Sieves As used by Government Intervention Boards and similar organisations worldwide for testing grains and cereals. Available in 200 mm diameter brass or stainless steel frames with stainless steel slotted plate and a range of aperture sizes as specified in ISO 5223.

	Lids & Receivers Lids, receiving pans and intermediate receiving pans are available in brass or stainless steel with the following diameters: 38, 100, 150, 200, 250, 300, 315, 400 and 450 mm as well as 3, 8, 12 and 18 inches. Half height receivers are also available.

	Pocket Sieve Set High quality pocket sieves are very useful for testing small samples either in the laboratory or on site. The brass sieve has a range of interchangeable mesh discs of different aperture sizes. It is supplied complete with a sieve brush and belt pouch.

		Sieve Brush & Analysis Graph Paper Double ended sieve brushes specially designed for cleaning sieves with one end coarse bristles and the other fine. Graph paper for the rapid analysis of sieve test data. Pad contains 25 sheets printed on semi-transparent detail paper to allow direct comparison of graphs.

		Sample Dividers These hand held sample dividers will subdivide material samples into smaller portions while retaining the characteristics of the original sample. Produced in stainless steel with slot widths or either 6.35 mm (1/4 in) or 12.7 mm (1/2 in).

	Wet Sieving Kit For tests that require wet sieving Endecotts offer conversion kits suitable for the Octagon and EFL shakers. Each kit includes top clamping plate with a perspex cover and spray rose, watertight seals and a stainless steel receiver with drainage spout.