Sieves

Certified Test Sieves

All test sieves manufactured to a National or International Specification are supplied with a Certificate of Compliance and individually serial numbered to provide full traceability.

Inspected Test Sieves

Test sieves inspected in accordance with the procedures listed in clause 5.2 and table 4 column 2 & 3 of ISO 3310: BS:410-1:2000. Details can be found by clicking on the specification tab above. 
Each sieve is supplied with an Inspection Certificate stating separately the values for the average aperture in both the warp and weft direction of the wirecloth.

ASTM E-11-1999 is also available. Details can be found by clicking on the specification tab above.

Mid Point Sieves

Test sieves with the sieving medium specification tolerances reduced by 30%. Each sieve is supplied with a Calibration Certificate giving the range of tolerances and measurements taken.

Calibrated Test Sieves

Test sieves inspected and calibrated in accordance with procedures listed in clause 5.2 and table column 4 & 5 of ISO 3310: BS:420-1:2000. Details can be found by clicking on the specification tab above.
Each sieve is supplied with a calibration certificate recording the number of aperture and wire diameters measured, the average aperture size and standard deviation separately for the warp and weft direction. The type of weave will also be stated.

ASTM E-11-1999 is also available. Details can be found by clicking on the specification tab above.



Matched Sieves

Two or more test sieves each fitted with a sieving medium having similar aperture characteristics. Each is supplied with a Calibration Certificate marked "Matched with sieve serial No........ Contact: sales@endecotts.com

Re-Inspection/Re-Certificate Service

Used sieves are examined and inspected in accordance with the appropriate specification. Complying sieves are issued with a Compliance, Inspection or Calibration Certificate as requested by the customer.