The best way to clean your sieves
Sieves should be cleaned after each analysis and replaced in their storage containers. Most of the "near mesh size" particles which block the apertures can usually be removed by inverting the sieve and gently tapping the frame. Alternatively the underside of the mesh can be stroked gently with the Endecotts test sieve brush , which has been specially designed for the use on test sieves with apertures over 1mm.
For sieves with smaller apertures and almost any other application the most efficacious method is the use of an Ultrasonic Cleaner.
Features of the Ultrasonic Cleaner :
The all stainless steel construction is ergonomically designed to give a long trouble free life.Endecotts ultrasonic cleaner is environmentally friendly, operating on 5.7 litres of organic solvent free water.It is equipped with, 4 high frequency transducers producing 35KHz at 2 x 240W. A sieve up to 200 mm or 8" in diameter is placed in the basket in order to commence with the cleaning procedure.
The control panel enables the user to set the following parameters: Cycle Time: 0 - 15 minutes or continuous
Ultrasonic Cleaning Concentrate