One of the most economic and efficient methods of sizing
particles in the micron range
The Air Jet Sizer is ideal for sieving difficult and very fine dry
particles from 20 æm upward. It is easy touse, extremely efficient
and provides accurate reproducible results.
The Air Jet Sizer can be supplied with its own separate vacuum
source which connects to the back of the sizer. Electrical power
for the vacuum unit is supplied by a connector on the Air Jet Sizer
enabling a single on/off switch to supply power to both
units. A safety microswitch on the Air Jet Sizer ensures that
the unit can not operate unless a sieve is in place on the sieve
Most sieving operations on the Air Jet Sizer take only a matter
of minutes. Useful functions including the ability to regulate the
level of vacuum, and constant or timed operation help to achieve
An Endecotts Air Jet Sieve of the appropriate aperture
size is placed in the airtight mounting plate bracket and a sealed
lid is placed on top of the sieve.
Vacuum is applied to the chamber beneath the sieve drawing
air out of the sieve through the apertures and carrying with it any
undersize particles. To create a continuous flow positive pressure
air is drawn into the sieve through a channel in a rotating arm
placed immediately below the microplate or sieve mesh.
The incoming air creates a wave within the sample helping to
fluidise the sample and clear any blocked apertures.Undersize
sample is discharged into the vacuum unit.
Please click on the image above to view the Air-Jet